Q32 Series Tumble Belt Shot Blasting Machine for Polishing Small
Q32 series tumble belt shot blasting machine is a small shot
blasting cleaning equipment, mainly by the room the shotblast
cleaning, shot blasting machine assembly, hoisting machine,
separator, shot blasting machine electrical system and other
The Feature Description
The tumble belt shot blasting machine is suitable for small and
medium sized castings, forgings, stampings, the gear, spring and
other parts of deoxidization, rust removal, remove scale and
surface strengthening, are especially suitable for the cleaning of
parts and reinforcement.
1. The cantilever centrifugal type shot blasting machine, has a
long service life, simple structure.
2. With 75 m/s, 80 m/s, 85 m/s three mass ejection speed.
3. The pulley that adopts international advanced quick change on
the structure, improve the production efficiency and reduce labor
4. Using BE type separator, good separation effect and higher
productivity, to improve the blade life have a positive effect.
5. Using the bag filter, dust emission concentration is lower than
the national standard, improved labor conditions.
6. This model increases the manual pill brake, door of sand
production of some special agencies.
Main Technical Details
|Maximum weight of a single piece||kg||10||150||30|
|Diameter of end disk||mm||Φ650||Φ1000||Φ1000|
|Abrasive flow rate||kg/min||100||250||250|
If the machine is not suitable for your workpiece, please tell us
the following information:
1) What kind of workpiece will you clean?
2) The size of workpieces ( the minimum and maximum length, width
and height) ?
3) The minimum and maximum weight?
4) Your requirement of cleaning efficiency?
1. Whether your equipment have passed some International Standard?
Now the quality of our shot blasting machine has met ISO9001
ISO14001 CE International Standard
2. How long is your equipment warranty?
General the warranty is one year (except quick-wear spare parts )
3. How many countries do you have exported?
50 countries, such as USA ,Canada,Brazil ,Chile ,Oman ,Indonesia
,Malaysia, Saudi Arabia,Australia,South Africa and so on
4. Could you tell me your company payment term?
General our payment term as follows:
1.30% T/T in advance ,70% payment before delivery
2. 30% T/T in advance ,70% L/C at sight
5. Whether your company can supply installation?
Generally for small shot blasting machine ,we can supply you
install video or guide you to install by email
For big shot blasting machine ,we will arrange one or two engineer
to guide your staff and install this machine for free ,but your
company need to supply air tickets and room and board