Auto Tumble Belt Type Steel Shot Blasting Equipment for Gear
Indicated for blasting and shot peening of forged, punched,
injected and casted parts, can operate with steel shot or steel
grit among other abrasive medias. Features fast work cycles due to
high efficiency blast wheels combined with good blast wheel power
and batch size ratio.
Other characteristic of this family of machines is the wider
abrasive separator built in at the machine lower part, which
provides a superior abrasive separation combined with a major
reduction on the machine height
|Productivity (ton/hour)||0.6 - 1.2||3 - 5||1.5 - 2.5|
|Loading weight (kgs)||200||800||600|
|Max. weight of 1 piece (kgs)||10||15||30|
|Diameter of roller (mm)||650||1000||1000|
|Available capacity (m3)||0.15||0.4||0.3|
|Pill impelling volume (kgs/min)||100||250||250|
|Dedusting air volume (m3/hour)||2200||6000||5000|
|Power dissipation (kw)||12.6||32.6||24.3|
|Dimensions (mm)||3681 x 1650 x 5800||3644 x 2926 x 5856||3972 x 2600 x 4768|
|Total weight (kgs)||2340||5843||7400|
Descaling of forged or heat treated parts
Desanding of ferrous and non-ferrous metal castings
Deburring of metallic and non-metallic parts
Deflashing of die cast parts
If the machine is not suitable for your workpiece, please tell us
the following information:
1) What kind of workpiece will you clean?
2) The size of workpieces ( the minimum and maximum length, width
and height) ?
3) The minimum and maximum weight?
4) Your requirement of cleaning efficiency?